Description

Solar Innova uses the latest materials to manufacture photovoltaic modules. Our modules are ideal for any application that uses the photoelectric effect as a clean energy source because of its minimal chemical pollution and no noise pollution.

 

The front of the module contains a tempered solar glass with high transmissivity, low reflectivity and low iron content.

 

These PV modules use high-efficiency polycrystalline silicon cells (the cells are made of several crystals of high purity silicon) to transform the energy of sunlight into electric energy. Each cell is electrically rated to optimize the behavior of the module.

 

The cell circuit is laminated using EVA (Ethylene-Vinyl Acetate) as a encapsulant in combination with a tempered glass on its front and a plastic polymer (Tedlar) on the back which provides complete protection and seals against environmental agents and electrical insulation.

 

The compact, anodized aluminum frame provides an optimal relationship-weight moment of inertia, to obtain greater rigidity and resistance to twisting and bending. It has several holes to attach the module to the support structure and ground if necessary.

 

The junction boxes with IP67, are made from high temperature resistant plastics and containing terminals, connection terminals and protection diodes (by-pass). These modules are supplied with symmetric lengths of cable, with a diameter of copper section of 4 mm and an extremely low contact resistance, all designed to achieve the minimum voltage drop losses.

 

Our modules comply with all safety requirements not only flexibility but also double insulation and high resistance to UV rays, all are suitable for use in outdoor applications. The design of these modules makes their integration in both industrial and residential buildings (one of the most emerging sectors in the photovoltaic market), and other infrastructure, simple and aesthetic.

 

 Data

Electrical Characteristics STC

Maximum power (Pmpp)

Wp

215

220

225

230

235

Tolerance

Wp

0 ~ +5

Voltage at maximum power (Vmpp)

Volts

26.81

26.99

27.08

27.38

27.56

Current at maximum power (Impp)

Amperes

8.02

8.15

8.31

8.40

8.53

Open circuit voltage (Voc)

Volts

33.10

33.32

33.43

33.80

34.02

Short circuit current (Isc)

Amperes

8.50

8.63

8.70

8.83

8.97

Maximum system voltage (Vsyst)

Volts

600 (UL) / 1,000 (IEC)

Diodes (By-pass)

Quantity

6

Maximum series fuse

Amperes

15

Efficiency (ηm)

%

14.62

14.96

15.30

15.64

15.98

Form Factor

%

≥ 73

 

STC:  Irradiance: 1,000 W/m2 + Module temperature: 25º C + Air quality: 1,5

Electrical Characteristics NOCT

Maximum power (Pmpp)

Wp

159

162

166

170

173

Voltage at maximum power (Vmpp)

Volts

24.41

24.57

24.66

24.93

25.09

Current at maximum power (Impp)

Amperes

6.51

6.62

6.75

6.82

6.93

Open circuit voltage (Voc)

Volts

30.25

30.45

30.56

30.89

31.09

Short circuit current (Isc)

Amperes

6.89

7

7.06

7.16

7.27

 

NOCT:  Irradiance: 800 W/m2 + Air temperature: 20º C + Air quality: 1,5 + Wind speed: 1 m/s

Mechanical Characteristics

Size

Height

1,482 mm

58.35 inches

Width

992 mm

39.05 inches

Thickness

40 mm

1.57 inches

Weight

Net

17.5 kg

38.6 pounds

Frame

Material

Anodized aluminum AL6063-T5, minim 15 µm

Front

Material

High transmissivity toughened glass

Thickness

3.2 ± 0.2 mm

0.13 inches

Cells

Type

Polycrystalline

Quantity

6 x 9 units

Size

156 x 156 mm

6 inches

Serial connection

Quantity

54 units

Parallel connection

Quantity

1 unit

Encapsulation

Material

EVA

Thickness

0.50 ± 0.03 mm

0.020 ± 0.0012 inches

Back-Sheet

Material

TPT

Thickness

0.32 ± 0.03 mm

0.013 ± 0.0012 inches

Junction box

Material

PVC

Protection

IP67

Isolation

Versus humidity and inclement weather

Cables

Type

Polarized and symmetric in length

Length

900 mm

35.4 inches

Section

4 mm2

0.006 inches2

Features

Low contact resistance

Minimal losses for voltage drop

Connectors

Material

PVC

Type

MC4

Protection

IP67

Thermal Characteristics

Temperature coefficient of short circuit current α (Icc)

%/º C

+ 0.0825

Temperature coefficient of open circuit voltage β (Voc)

%/º C

- 0.4049

Temperature coefficient of maximum power γ (Pmpp)

%/º C

- 0.4336

Temperature coefficient of current at maximum power (Impp)

%/º C

+ 0.10

Temperature coefficient of voltage at maximum power (Vmpp)

%/º C

- 0.38

NOCT (Nominal Operating Cell Temperature)

º C

+ 47 ± 2

Tolerances

Working temperature

º C

º F

- 40 ~ + 85

- 40 ~ + 185

Dielectric Isolation Voltage

Volts

3,000

Relative humidity

%

0 ~ 100

Wind resistance

m/s

60

kg/m2

Pa

245

2,400

pounds/feet2

491.56

Mechanical load-bearing capacity

kg/m2

Pa

551

5,400 (IEC)

pounds/feet2

Pa

75.2

3,600 (UL)

Fire resistance

Class

C

Measurements

MEASUREMENTS PERFORMED IN ACCORDANCE WITH STANDARD TEST METHODS

EN 60904-3 AND ASTM E1036, CORRECTED TO STANDARD TEST CONDITIONS (STC)

Air quality/Spectral distribution

AM

1.5 ASTM G173-03e1 (2,008)

Luminous intensity/Radiation

W/m2

1,000

Cell temperature

º C

25 ± 2

 

MEASUREMENTS PERFORMED IN SOLAR SIMULATOR

Class

AAA (according to IEC 60904-4)

Power measurement uncertainty is within

± 3 %

Structural Characteristics

Cells

High efficiency cells with anti-reflective layer of Silicon Nitride.

Electric conductors

Flat Copper (Cu) bath in a Tin (Sn) and Silver (Ag) alloy, which improves weldability.

Welds

Cell and drivers in installments for stress relief.

Laminate

Composed of ultra-clear tempered glass on the front and rear, EVA encapsulant thermostable embedding cells and electrical insulation on the back formed by a compound of tedlar and polyester.

Junction box

Hoses and quick connectors with anti-error. Include bypass diodes, interchangeable thanks to the wiring system has no welds, all electrical contacts are made by pressure, thus avoiding the possibility of cold welding.

Characteristics of Work

  • The power of solar cells varies in the output of the production process. The different power specifications of these modules reflect this dispersion.

  • Cells during the early months of light exposure, may experience a degradation photonics could decrease the value of the maximum power the module up to 3 %.

  • The cells, in normal operating conditions, reach a temperature above the standard measurement conditions of the laboratory. The NOCT is a quantitative measure of the increase. NOCT measurement is performed under the following conditions: radiation of 0.8 kW/m2, temperature 20º C and wind speed of 1 m/s.

  • The electrical data reflect typical values of the modules and laminates as measured at the output terminals at the end of the manufacturing process.

Performance Graphs

 

 

 

 Drawings

Front

Back

Frame

Junction box

Connectors

 

Electric

 Pictures

Module

  • 001001
  • 002002
  • 003003
  • 004004
  • 005005
  • 006006
  • 007007
  • 010010
  • 020020
  • 021021
  • 022022
  • 098098
  • 099099
  • el-156p54el-156p54

Components

Frame

Glass

Top encapsulant (EVA)

Cells

Lower encapsulant (EVA)

Back-Sheet (TPT) and Junction Box

 Videos

Photovoltaic effect

Production-Welding-Cells-1

Production-Welding-Cells-2

 Certificates

Our manufacturing plants have been prepared in accordance with the ISO 9001:2008, in terms of Quality Management Systems.

 

Our manufacturing plants have been prepared in accordance with the ISO 14001:2004, in terms of Environmental Management System.

 

Our manufacturing plants have been prepared in accordance with the OHSAS 18001:2007, in terms of Occupational Health and Safety Management Systems.

 

We have a quality control divided into three elements:

  • Regular inspections allow us to guarantee the quality of the raw material.

  • Quality control in the process of our manufacturing procedures.

  • Quality control of finished products, we conduct through inspections and tests of reliability and performance.

The photovoltaic modules Solar Innova have passed several international certification requirements and continue to improve the quality and performance of our products of proven technologies. Quality is one of our core principles and the pursuit of quality is the engine of the company's future, in their desire to continually offer better products.

 

Our PV modules are certified by internationally recognized laboratories and are proof of our strict adherence to international safety standards, long term performance and overall quality of products.

 

Factory

ISO 9001

ISO 9001

ISO 14001

ISO 14001

OHSAS 18001

OHSAS 18001

CE

CE CE CE

IEC/EN 61215-IEC/EN 61730

IEC/EN 61215-IEC/EN 61730 IEC/EN 61215-IEC/EN 61730

IEC/EN 61701

IEC/EN 61701 IEC/EN 61701

IEC/EN 62716

IEC/EN 62716 IEC/EN 62716

MCS

MCS

ANSI/UL 1703

UL

Recycled

 Guarantee

 

All solar panels manufactured by Solar Innova have the following minimum guarantees:

 

Standard Guarantees

Manufacturing defects

  • 12 years.

Performance

  • 90% of rated power after 10 years of operation.

  • 80% of rated power after 25 years of operation.

Linear Performance Guarantee

The linear power guarantee Solar Innova modules ensures a higher power than that of the other photovoltaic module during the lifetime of the plant. The combination of our high quality modules with an optimal plant design results in maximum performance for end users and allows you the maximum performance guarantees to their customers without having to worry.

 

Linear performance warranty Solar Innova

 

 

Importance of Ensuring Adequate Power

Solar Innova offers great advantages with its linear power warranty. Other power guarantees are reduced in stages over the time periods established. These guarantees remain staggered continuous from beginning to end in the same period. Considering the drastic reduction in the coverage of the guarantee to pass a temporary step to another, there is the possibility that the module power drops sharply at the beginning of the period, without being able to claim the manufacturer. To prevent unexpected power loss out of warranty, it is best to have a potency guarantee is reduced linearly over the lifetime of the module.

Power Tolerance

The power tolerance of a photovoltaic module indicates the range within which the power of a module can deviate from its rated power. The lower the negative tolerance, the greater the power output of the module.

Power Degradation

All solar photovoltaic modules suffer a degradation of power throughout its years of operation. Both qualities of silicon as the other ingredients used in their production influence the level of degradation. Therefore, the higher the quality of the components of the module, the lower the degree that is affected by this degradation.

 Packing

Box 2 Panels

 

Box 2 Panels

Size

1,482 x 992 x 90 mm

Weight

35 kg

Box

 

Box

Size

1,550 x 1,150 x 2,120 mm (20’ FT)

1,550 x 1,150 x 2,500 mm (40’ HC)

Panels

40 pcs/pallet (20’ FT)

48 pcs/pallet (40’ HC)

Weight (Empty)

160 kg (20’ FT)

245 kg (40’ HC)

Container 20’

 

Container 20’ FT

Size

5.89 x 2.35 x 2.39 m

(each big pallet add 18 pieces

Panels

280 pcs

solar modules by 9 boxes)

Pallets

7 pcs

Weight (Net)

17.5 kg x 40 pcs + 160 kg = 860 kg

Weight (Gross)

860 kg x 7 pallets = 6,020 kg

Container 40’

 

Container 40’ FT

Size

12.04 x 2.35 x 2.38 m

(each big pallet add 4 pieces

Panels

672 pcs

solar modules by 8 boxes)

Pallets

14 pcs

Weight (Net)

17.5 x 48 pcs + 245 kg = 1,085 kg

Weight (Gross)

1,085 kg x 14 pallets = 15,190 kg

 Downloads

Technical Data Sheet

Commercial Data Sheet

Certificates

ISO 9001:2008 (pdf)

 

ISO 14001:2004 (pdf)

 

OHSAS 18001:2007 (pdf)

 

CE (pdf)

 

IEC/EN 61215-IEC/EN 61730 (pdf)

 

IEC/EN 61701 (pdf)

 

IEC/EN 62716 (pdf)

 

MCS (pdf)

 

UL (pdf)
Skype-Call Skype-Add Skype-Chat Skype-Profile Skype-Voice  Skype-File